MIL-DTL-45195F (AR)
3.2.14 Ballistic test. The components and assemblies
shall comply with all requirements specified on dwg. 9211611.
3.3 Ammunition lot numbering. Ammunition lot numbers
shall be assigned in accordance with MIL-STD-1168.
3.4 Loading of high explosive
3.4.1 Interior cavity metal defects. The body cavity
shall be free of scale, fins, burrs, draw marks, laminations,
embedded foreign matter, folds, pits and sharp edges, in
accordance with visual standards (see 6.3).
3.4.2 Unsolidified pool of paint. There shall be no
unsolidified pool of paint or blister in the projectile cavity
prior to loading of the explosive. The interior surface of the
projectile shall be dry when the high explosive is poured into
the projectile.
3.4.3 Projectile cavity contamination. The interior
cavity of the projectile prior to loading shall be free from
foreign matter, chemical residue, oil and grease.
3.4.4 Interior coating. Projectile having the interior
wall imperfectly coated, in accordance with visual standards
(see 6.3) shall not be loaded.
3.4.5 Solid explosive. Solid explosive shall not be
present in the projectile prior to loading or be added to the
shell during pouring or cooling.
3.5 Radiographic inspection.
3.5.1 Metal parts defects. There shall be no cracks,
pipes or thin wall sections in the projectile metal part.
There shall be no evidence of gaps, as defined by visual x-ray
standards, between the rotating band and its seat (see 6.3.)
3.5.2 Foreign material. There shall be no foreign
material in the explosive charge.
3.5.3 Base separation. There shall be no visible base
separation between the explosive charge and the shell base.
3.5.4 Porosity (see 6.17.)
3.5.4.1 Shrink porosity. Shrink porosity within the
explosive charge shall not exceed the requirements specified in
Table I.
3.5.4.2 Spherical porosity. Spherical voids greater than
1/8 inch in diameter shall be considered as cavities. Spherical
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business