MIL-DTL-60547G (AR)
(Copies of ANSI standards are available online at
https://www.ansi.org/ or from American National Standards
Institute, 25 West 43rd Street, New York, NY 10036)
2.4 Order of precedence. In the event of a conflict between
the text of this document and the references cited herein, the
text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Required inspections.
3.1.1 First article. When specified (see 6.2), a sample
shall be subjected to first article inspection in accordance with
4.2.
3.1.2 Conformance. A sample shall be subjected to
conformance inspection in accordance with 4.3.
3.2 Components and assemblies. The components and
assemblies shall comply with all requirements specified on
drawing 10535876 for the M1, or drawing 12551742 for the M760.
3.2.1 Body (prior to nosing). The materials, components and
assemblies shall be in accordance with drawing 10535878 for the
M1, or drawing 12551740 for the M760.
3.2.2 Body (prior to band seat machining and threading
nose). The materials, components and assemblies shall be in
accordance with drawing 10535878 for the M1, or drawing 12551740
for the M760.
3.2.3 Body. The materials, components and assemblies shall
be in accordance with drawing 10535878 for the M1, or drawing
12551740 for the M760.
3.2.4 Body assembly. The materials, components and
assemblies shall be in accordance with drawing 10535877 for the
M1, or drawing 12551741 for the M760.
3.2.5 Projectile, 105MM, HE, M1 or M760 (as applicable)
Metal Parts Assy. The materials, components and assemblies shall
be in accordance with drawing 10535876 for the M1, or drawing
12551742 for the M760.
3.2.6 Projectile, 105MM, HE, M1 or M760 (as applicable)
metal parts assembly destructive lot acceptance. The materials,
components and assemblies shall be in accordance with drawing
10535876 for the M1, or drawing 12551742 for the M760.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business