INCH-POUND
MIL-DTL-60547G (AR)
17 December 2008
SUPERSEDING
MIL-P-60547F (AR)
25 August 1986
DETAIL SPECIFICATION
PROJECTILE, 105MM, HE, M1 AND M760
METAL PARTS ASSEMBLY
Inactive for new design after 9 February 1996.
This specification is approved for use by the U.S. Army
Armament Research Development and Engineering Center
(ARDEC), and is available for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification contains requirements not
covered by the drawings for the fabrication and assembling of
metal parts for Projectile, 105MM, HE, M1 and M760. (see 6.1).
Comments, suggestions, or questions on this document should be
addressed to the Commander, U.S. Army ARDEC, ATTN: AMSRD-AAR-QES-
E, Picatinny, NJ 07806-5000 or emailed to
ardecstdzn@conus.army.mil. Since contact information can change,
you may want to verify the currency of this address information
using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1315
DISTRIBUTION STATEMENT A.
Approved for public release;
distribution is unlimited
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business