MIL-DTL-20354D (AR)
4.3 Conformance inspection.
4.3.1 Inspection lot formation. Inspection lots shall comply
with the lot formation provisions of MIL-STD-1916,
Acceptance by Tables, paragraph 4.2. In addition, inspection
lots of projectile shall contain:
a. Projectile metal parts assemblies from one lot
interfix from one manufactures
b. Expelling charge assemblies from one lot interfix
number from one manufacturer
c. Canister assemblies from one lot interfix number
from one manufacturer
d. Parachute assemblies from one lot interfix number
from one manufacturer
e. Primers of one lot interfix number from one
manufacturer
f. Cartridge assemblies of one lot interfix number from
one manufacturer
4.3.2 Classification of characteristics.
a. Sampling requirements. Inspection sampling
requirements for critical, major and minor
characteristics are defined in MIL-STD-1916. Unless
otherwise specified, inspection level IV shall be
used for all characteristics defined as majors and
inspection level II for all minor characteristics.
Critical characteristics shall be addresses in
accordance with MIL-STD-1916.
b. Conformance inspection. Conformation inspection
shall be performed accordance with paragraph 4.3.2.1
through 4.3.2.19. For all conformance inspections
the same sample specimen may be used for all non-
destructive examinations or tests.
c. Alternative inspections. Alternative conformance
inspections shall be submitted and approved in
accordance with MIL-STD-1916
d. Tool control. Dimensions marked tool control shall
be gaged at the beginning of production and whenever
tooling is replaced. Where destruction of
components is necessary to inspect these dimensions,
measurements of the tool may be substituted provided
there is an established correlation between the tool
dimensions and the component dimensions prior to the
start of production. There shall be adequate
surveillance to assure that the drawing requirements
are being met throughout the life of the tool.
14
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business