INCH-POUND
MIL-DTL-20354D (AR)
25 October 2007
SUPERSEDING
MIL-C-20354C (AR)
19 May 1998
DETAIL SPECIFICATION
CARTRIDGE, 105MM, ILLUMINATING, M314A3
LOADING, ASSEMBLING AND PACKING
Inactive for new design after 14 March 1997
This specification is approved for use by the U.S. Army
Armament Research Development and Engineering Center
(ARDEC), and is available for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE.
1.1 Scope. This specification covers Projectile, 105MM,
Illuminating, M314A3 Loading, Assembly and Packing (see
6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are
specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections
of this specification or recommended for additional
information or as examples. While every effort has been made
to ensure the completeness of this list, document users are
cautioned that they must meet all specified requirements of
documents cited in section 3 or 4 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document
should be addressed to the Commander, U.S. Army ARDEC,
ATTN: AMSRD-AAR-QES-E, Picatinny, NJ 07806-5000 or
emailed to ardecstdzn@conus.army.mil . Since contact
information can change, you may want to verify the
currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1315
DISTRIBUTION STATEMENT A. Approved for public release;
distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business