INCH-POUND
MIL-DTL-70526B(AR)
6 April 2009
SUPERSEDING
MIL-P-70526A(AR)
6 July 1994
DETAIL SPECIFICATION
PROJECTILE, 105 MILLIMETER, HE, RA- M913/M927, DELAY
ASSEMBLY FOR
Inactive for new design after 21 August 1998
This specification is approved for use by the U.S. Army
Armament Research Development and Engineering Center
(ARDEC), and is available for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification contains requirements and
quality assurance provisions for the fabrication and packaging
of parts and assembly of the delay assembly for the 105MM, High
Explosive, Rocket Assisted, M913 / M927 Projectiles.
Comments, suggestions, or questions on this document should be
addressed to the Commander, U.S. Army ARDEC, ATTN: RDAR-QES-E,
Picatinny Arsenal, NJ 07806-5000 or emailed to
ardecstdzn@conus.army.mil. Since contact information can
change, you may want to verify the currency of this address
information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 1315
DISTRIBUTION STATEMENT A.
Approved for public release;
distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business