INCH-POUND
MIL-DTL-48360A (AR)
31 March 2014
SUPERSEDING
MIL-C-48360(AR)
3 July 1980
DETAIL SPECIFICATION
CHARGE, PROPELLING, M200, FOR 105MM HOWITZER, M119
LOADING, ASSEMBLING AND PACKING
This specification is approved for use by the U.S. Army Armament Research, Development and
Engineering Center (ARDEC), and is available for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the loading, assembling and packing for one type of
Propelling Charge designated as M200 for the M119 Howitzer.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this standard or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3 and 4 of this specification, whether or
not they are listed.
Comments, suggestions, or questions on this document should be addressed to: Commander, US
Army ARDEC, Attn: RDAR-EIQ-SE, Picatinny Arsenal, New Jersey 07806-5000 or emailed to
usarmy.picatinny.ardec.list.ardec-stdzn-branch@mail.mil. Since contact information can change,
you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.dla.mil.
AMSC N/A
FSC 1315
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business