INCH-POUND
MIL-DTL-14852D (AR)
06 August 2009
SUPERSEDING
MIL-DTL-14852C (AR)
25 October 2007
DETAIL SPECIFICATION
PROJECTILE, 105MM, ILLUMINATING, M314A3 AND
PROJECTILE, 105MM, INFRARED ILLUMINATING, M1064
METAL PARTS ASSEMBLY
Reactivated after 06 August 2009 and may be used for new and
existing designs and acquisitions
This specification is approved for use by U.S. Army Armament Research,
by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the metal parts assembly
used in two types of 105MM illuminating projectiles.
1.2 Classification. The illuminating projectiles are classified
as follows:
1.2.1 Projectile, 105MM, Illuminating, M314A3. The M314A3 is a
semi-fixed visible-light illuminating cartridge for use with 105MM
howitzer systems. The projectile is hereafter referred to as the
M314A3.
1.2.2 Projectile, 105MM, Infrared Illuminating, M1064. The M1064
is a semi-fixed infrared illuminating cartridge for use with 105MM
howitzer systems. The projectile is hereafter referred to as the
M1064.
Comments, suggestions, or questions on this document should be
addressed to the Commander, U.S. Army ARDEC, ATTN: RDAR-QES-E,
Picatinny Arsenal, NJ 07806-5000 or emailed to
ardecstdzn@conus.army.mil. Since contact information can change,
you may want to verify the currency of this address information
using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1315
DISTRIBUTION STATEMENT A.
Approved for public release; distribution
is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business